Remote control inext

The inext programmable remote control allows you to simultaneously control your set-top box and TV.

Programming the remote control to control the TV

1. You enter the remote control programming mode by pressing the “SET” button in the “TV remote control” section. Press the “SET” button, the indicator light will start to glow red, keep it pressed until it starts to glow red brighter.
2. Select one of the buttons in the “TV Remote” section of the remote control to which you want to record a command, press it once and release it, the LED will start flashing, now the remote control is ready to receive the IR signal for recording.
3. With the IR LEDs of the two remotes (TV and inext) facing each other at a distance of about 1-2 cm, press once on the TV remote control the desired button whose function you want to transfer. If the command is accepted, the LED on the inext remote control blinks three times and lights steadily, which means that the command is recorded.

Repeat steps 2-3 for all the buttons you want to program.

If you have written all the commands and want to exit the programming mode, press the “SET” button.

Video: How to program the inext TV5 remote control?